Posted in Accessories, Decor, Dollhouses, Miniature tutorials

Custom Modern Lighting

img_2783
Custom made “Modern Wire Ball”  light fixture (please excuse the dog hairs in the picture. Can’t be avoided at my house!)

So I got inspired by my friends over at the Greenleaf forum, to try my hand at making a modern light fixture. This was the result.

To be honest I’m so happy with this fixture that I might have to rethink the entire lighting plan for the San Franciscan.

In fact I’m stretching the truth to say I custom made it, because it’s essentially constructed out of premade components, super glue & spray paint.

It’s incredibly simple but incredibly effective.

So forum member SewMini asked about modern fixtures and pointed to this one as an example of what she was looking for.

55751_XXX_v1.tif&wid=480&cvt=jpeg

Later that day I was in my local Choice store (Australian version of a dollar store, though hardly anything costs only a dollar. 😉 ) and found these balls in the craft section

img_2767

I thought the smaller balls would be great for pendants and the larger ones for a statement light in the middle of a room.

img_2771
Smaller pendant size

I wanted to use the smaller size to start but I didn’t have any G.O.R bulbs so I had to raid my lights stash for a fixture and that meant, I had to use the larger wire ball if I had any hope of fitting it within the structure.

I tried to replicate the fitting in the inspiration piece by attempting to shove a simple 3 arm chandelier into the wire ball… umm.. no.. that didn’t fit… so I rummaged some more and came up with one of these ball pendants. I actually think if I make another light, I would try to find a half scale 3 arm chandelier and change out the chain for a 1:12 scale one to get the look above.

I ditched the bottom spindle taped off the ceramic bulb and spray painted it silver using Rustoleum “Satin Nickel”.

I also sprayed the wire ball, so that there would be continuity of colour. I actually prefer the silver of the original ball but getting that finish in paint would be near on impossible and they just don’t seem to make many dollhouse fixtures in silver. If I used G.O.R bulbs or GOW bulbs I would have been able to keep the colour as long as I could find a tiny chain to match. Much easier!

I think this light could also look great in a antique copper colour or black for a more industral feel.

Once everything was dry I tested the light to make sure it worked. then worked the wire apart in one section and pushed the ball pendant through. I then repositioned the wires over the hole and strategically centred one wire at the top to attach the chain ring to. A dab of superglue does the job of holding the pendant chain to the ball. but you could use a bit of jewellry wire also or you could fashion the wire of the ball so that the top of the fixture holds it on.

You will need to fiddle with the chain ring a bit to make sure the pendant sits straight and centre in the ball. It helps to hang the fixture from something for this step as the weight of it hanging helps and you will get a true indication of how it will hang in your dollhouse.

For light bulb changing, just snap off the glue (this is the reason for just a dab and pull the bulb out.

 

 

Posted in Accessories, Decor, Dollhouses, Furniture

Making a 1:12 Fire Chimney Breast & Hearth

img_2651

I bought this Mantel in an Ebay auction, can’t remember what I paid for it but it wasn’t very much.. the shipping was more because it came from the UK. :/

It’s made of plaster I think and it’s a bit banged up with chips out of it and edges broken off.

img_2657img_2654

But I don’t really care, I liked the fairly simple traditional style and given my house is going to be a bit shabby, I just think it adds rustic charm. 🙂

In my imagination my house has been around for a long time and had many owners and the fireplaces have had a few bangs as the little people moved their furniture in and out.

I could just prop this fireplace up against the wall and be done with it, but that doesn’t make my realism loving heart sing. So now I needed to build it a chimney breast and hearth.

I started by making a chimney breast out of foam core. I used the dimensions of the mantel plus half an inch on each side for the the face of the breast. Then I decided how deep I wanted the firebox to be and cut sides to match (about an inch because I have a particular phoenix miniatures insert in mind).

img_2641img_2643

I measured the inner dimensions of the mantel and cut out the hearth space by marking the middle point of the chimney breast an marking half the width of the inner dimensions of the mantel outwards off this mark. This way the hole is centred on the chimney breast.

It’s pretty rough, but it doesn’t have to be pretty because it will be covered with card-stock and the mantel will cover the rest.

img_2642

I did cut mitred corners because I wasn’t sure what kind of finish I was going to give it at the time and I filled in any imperfections with spackle and gave it a sand. The mitred corners were relatively easy to make because I have a Foam Werks bevel cutter which does the job with ease. Any mistakes were operator error.. lol

Next I made the fire box to fit inside the hearth using the cut out piece from the mantel face as the back and then measuring the side walls of the chimney breast for the sides.

img_2539

I then started bricking it with egg carton bricks. You’ll note my fire box has a “lid”.. this is not because I want the chimney to be bricked up, but because I don’t want anyone to be able to see up the fireplace chimney breast as this will be where I hide most of my wiring for the house. It’s really just to give the illusion of the bricking continuing up the chimney.

It’s good to have a little selection of bricks to choose from as you go. And there is my pile of deconstructed egg cartons. 😉

img_2543

With chimney breast and Mantel in place… for a look at progress and to make sure everything is straight.

img_2546

Firebox back done. 🙂

The shims between the roof & the sides are just to give the roof a bit of height and an angle so that it’s not massively obvious when put together. Remember it’s supposed to be an illusion 😉

img_2547

And with sides complete and breast and mantel in place. I think it’s turning out well. 🙂

Next up is painting the bricks. I gave them a base coat of burnt sienna stippled on and then used a black wash to soot them up. This fire place has been used… alot!

img_2649

I’m not worried about the little spots that don’t have paint, it kind of looks like left over mortar on the bricks. I like that, it adds an old brick feel.

I still need to seal this and then grout. Not sure what I’m going to use for that. Either paperclay or spackle are most likely. Once I have that done, I’ll used some dark washes to dirty it up too.

Here’s what it looks like all together. I love it! 😀img_2638

And in the house.

img_2622

Ignore the “marble” hearth.. it’s just a place marker. I still need to make a proper one. That should be interesting! 🙂

Posted in Accessories, Decor, Dollhouses

Coastal Decor

The other day when I wasn’t feeling well, I decided to take a break from building and make a few decor items…. I was looking at my coffee table shell bowl and realised there were a few teeny tiny little shells and even pieces of coral in there…. Well, inspiration struck and I decided to make some modern coastal decor for my far off in the distance Hampton’s dollhouse… one day….

Not satisfied with just the shells I rummaged around in my charms and findings for nautical/coastal type items and found the fish skeleton and a seahorse… in they went to the mix.

I used jewelry pins to secure the shells, coral & fish to bases made of cut up coffee stirrers topped with cut up skinny sticks which were then stained with furniture touch up pens. I drilled tiny holes in the bases to attach the pins to the base and glued them to the back of the shells. With the coral I drilled a hole in the bottom of it as well to secure it to the base with a pin.

The base of the star shell is made from two clear plastic beads.

img_2487

Not content to stop there.. I rummaged around in my fabric stash and made some blue motif cushions.

img_2489img_2491img_2494

 

Then I got distracted by my bead box and made quite a few perfume/cosmetic bottles & jars…. I got a bit carried away…  😉img_2474

Posted in Accessories, Decor, Dollhouses, Furniture

Love Seat Rehab

img_2429

So I have this lounge suite set in my stash that I don’t mind the shape of but ugh.. the fabric makes my eyes hurt… lol

I decided something had to be done!.. I chose the 2 seater/love seat as my guinea pig (I’ve shown the 3 seater above because I forgot to take a picture of the 2 seater before I pulled it apart.)

The fabric was glued down within an inch of it’s life so I put the piece in the microwave for 10 seconds to loosen it up. It worked but there was soooo much glue!

Here is a picture of the pieces after the sofa had been deconstructed and after I had painted the main wood pieces with primer. I did this because I would be using a lighter fabric and didn’t want the wood to show through and/or leech into the fabric over time.

img_2430

During deconstruction some of the cushion foam got destroyed so I had to piece in some new foam so as not to have a lumpy sofa! This foam was part of the packaging in another piece of furniture’s box. NEVER through these kinds of packaging materials away!… You never know when you might need them. 🙂img_2431

New foam pieced in.img_2432

I cut out all my fabric for each piece before starting the process. Making sure to cut a little larger than each piece to allow for folding over to cover seams. Planning is key in this stage as you need to know how you are going to reconstruct the sofa and plan you fabric placement and size required appropriately. You also need to know which cushions you will be using in which location and facing in which direction so you can make sure that the fabric all faces the same way and that you have enough overhang to do the job you want it too.

Now to cover the cushions making sure to have the “grain”of the fabric facing the same way and making sure that it is sitting straight on the pieces where it will show. Regular Tacky Glue will do the job.img_2433

Cut the corners and fold like a present. img_2448

The base cushions were completely covered and glued on all four sides the back cushions were left open on two sides because they would wrap over the top and side of the couch during reassembly. You can see a completed seat cushion below bottom left and the two back cushions top right. The fabric you see beside the back cushions is the armrest fabric.img_2437

Then on to the arms.

I had to sand a lot of glue of of the front of the arms before starting as it would have made them lumpy if I left it on. I also noticed when I held them together that who ever manufactured these chairs used two different sized dowels for the armrests! lolimg_2440

For the arms I first covered the front… I was careful not to pull the fabric too tight so that the “grain”stayed as straight as possible. I cut the fabric a bit larger than the arms and wrapped it around the sides. I cut little pizza wedges out of the excess to get a good fit around the round portion.img_2439

I made a hem on the front face of the arm rest fabric for a clean finish. Then I folded the armrest fabric around the arm with enough of an overhang to cover the side of the base and be folded and glued underneath and out of sight.

img_2443

On to the base.

I cut enough fabric to go all the way around the base piece from top front to bottom to back. I know a lot of this area will be covered by cushions or other fabric pieces but just in case there are any gaps, this will make them less obvious.

I started by gluing the front of the back with enough over hang to fold over for a neat finish.img_2444

Then I continued down the seat, taking extra care with the base front as this will be very visible on the finished product.img_2436

And then across the bottom. It’s important to cover the bottom because you don’t want a beautiful upshot photo or view to be ruined by the sight of an unfinished sofa bottom.

I folded the base sides like a present. Cutting away excess fabric at the corners.img_2446

I left the back unglued as this will be the last piece to be attached during reassembly.img_2447

The next step was to attach the back cushions. img_2451

Remember I left the top and side open? This is why. They are attached over the back and side of the sofa. This will give a clean finish from the top and side view once the back cover is on.img_2449

Side view.img_2450

Front view so far. 🙂img_2451

Second back cushion attachment. Top done first. Side still to be glued.img_2454

Both back cushions on.img_2455

Now to attach the arms. As I said earlier. The side panel is attached all the way down the side to the bottom.img_2456img_2457

Now the seat cushions get glued in.img_2458

And finally with the last arm glued in and the back piece glued on (with hems on all three sides for a clean finish.)

I added a bit of twine as piping at the point where the seat cushions & the base meet just to tidy it up a bit. A major improvement, no?img_2459

With the legs put back on we have a final product!img_2466